Titanium racks advantages and installation

Advantage:

1, good conductivity, acid-resistant titanium materials. Contact with the conductive rods made of the best copper hook.

2, to make the current freely through. Not because the cross section is too small, as well long electricity, overheating and burning titanium racks.

3, titanium with insignificant parts contact surface area, but to ensure the current through. Contact points do not result in local overheating, burning parts or racks.

4, the thickness of 0.6mm below the sheet or molding parts, high dimensional accuracy and finish parts, hard anodized parts, hanging with universal hanging parts, in order to ensure product quality and improve production efficiency, have to According to the shape of the parts and anodized parts design and manufacture of special hanging to ensure the quality of parts anodized.

Installation and use:

1, the bottom of the titanium racks from the bottom of the tank for the 150 ~ 200mm

2, work sink into the electric liquid concentration of the distance from the liquid level of about 40 ~ 60mm

3, the distance between the tracks and the hanger is 20 ~ 40mm

4, hanging wall and wall to be greater than 50mm

5, manual operation of the titanium can be used with the leading quality is generally about 1 ~ 3KG

6, the lever position should be 80mm above the liquid level to withstand the application of mechanical strength of the entire rack and work weight

7, the main pole, role play the role of carrying the weight of the camel work and the role of current transfer should have sufficient mechanical strength and conductivity of the plot.