Function and Characteristic Analysis of Titanium Plate

Titanium plate implementation standards are too, the national standard is GB / T3621-2007, GB / T13810-2007, American standard is ASTM B265, ASTM F136, ASTM F67, AMS4928.

First, titanium plate manufacturing process

A forging process is carried out at a metal recrystallization temperature.

Hot rolling is performed at a temperature higher than the recrystallization temperature.

Cold rolling plastic deformation temperature is less than the recovery temperature of the rolling process.

Annealing: slowly heat the metal to a certain temperature, keep enough time, and then cool at the appropriate speed (usually slow

Cooling, and sometimes controlled cooling) of a metal heat treatment process.

Pickling: The part is immersed in an aqueous solution of sulfuric acid or the like to remove a thin film such as an oxide of the metal surface. Is electroplating, enamel,

Rolling and other processes of the pre-treatment or intermediate treatment

Second, the characteristics of titanium plate

1. Titanium plate is the surface of the oxide film is equivalent to a good long-term war with the release agent, the use of titanium plate to save the

Separation agent, so that easy to peel off the plate, eliminating the pre-treatment of the process of species, titanium plate than the copper plate to the light half.

2. Titanium plate of the life of the copper plate is more than 3 times, according to operating conditions up to 10 to 20 years

3. With titanium plate made of electrolytic copper crystal structure dense, smooth surface, excellent quality.

4. Since the titanium plate, without the need to apply the separation agent, which can avoid the pollution of copper electrolyte.

5. Improve production capacity to reduce the cost of electrolytic copper production, which gets a better economic benefits.