The Making Process and Characteristics of Titanium Plate

Craftsmanship

Hot forging, the metal recrystallization temperature above the forging process.

Hot rolling is performed at a temperature higher than the recrystallization temperature.

Cold rolling, plastic deformation temperature is less than the recovery temperature of the rolling process.

Annealing, the metal slowly brought to a certain temperature to maintain sufficient time. Then the appropriate speed

Cooling, (usually slow cooling, sometimes controlled cooling) of a metal heat treatment process.

Pickling, immerse the part in an aqueous solution such as sulfuric acid to remove a thin film such as an oxide of the metal surface. Is electroplating, enamel, rolling and other pre-treatment or intermediate processing.

Titanium plate characteristics

1. Titanium plate is the surface of the oxide film is equivalent to a good long-term wear-resistant release agent using a titanium plate to save the separation agent. The plate is stripping easy. Remove the process of pre-treatment plate. Titanium plate Brighter than the copper plate.

2. Titanium plate life is greater than 3 times the copper plate. According to operate conditions up to 10 to 20 years

3. Electrolytic copper made of titanium plate is compact and the surface is smooth and smooth.

4. Since the titanium plate does not have to be coated with the separating agent, it can avoid the pollution of the copper electrolyte.

5. To improve production capacity to reduce the cost of electrolytic copper production, and thus have better economic benefits.